Working Anomalies - Joannes G35 gas Manual De Uso Y Mantenimiento

WORKING ANOMALIES

SIGNS
1 THE BURNER DOES NOT START.
2 THE BURNER STARTS BUT
DOES NOT ORIGINATE THE
FLAME. THEN IT BLOCKS
3 THE BURNER STARTS,
ORIGINATES THE FLAME. THEN
IT BLOCKS.
POSSIBLE CAUSES
A. Lack of electrical input.
B. The gas does not reach the
burner.
A. The gas valves do not open.
B. There is no discharge between
the electrode tips.
C. No consent from the air
pressure switch.
A. Lacking or inadequate revelation
of the flame from the control
electrode.
REMEDIES
.A.Check the fuses of the supply line.
Check the fuse of the burner and
of the electric unit.
Check the line of the thermostats
and of the gas pressure switch.
B. Check the opening of the cut-out
devices set along the supply line.
A. Check the working of the valves.
B. Check the working of the ignition
transformer, check the position
of the electrode tips.
C. Check the setting and the working
of the air pressure switch.
A. Check the position of the control
electrode. Check the value of the
ionisation current.
pag. 63