Positioning The Electrodes - Joannes G35 gas Manual De Uso Y Mantenimiento

pag. 53

POSITIONING THE ELECTRODES

Two ignition electrodes and one control electrode are provided.
To position them, follow the indications of the table below.
WARNING : THE IGNITION AND CONTROL ELECTRODES SHALL NOT TOUCH THE DEFLECTOR, THE
NOZZLE OR OTHER METALLIC PARTS. OTHERWISE THEY WOULD LOSE THEIR FUNCTIONS,
COMPROMISING THE WORKING OF THE BURNER.
It is necessary to check the proper position after each intervention on the combustion head.
Control electrode
ADJUSTMENTS
• Loosen knobs B.
• By operating on them the position of the nozzle as to the combustion head changes.
• Position knobs in correspondence of the values 1, 2, 3, respectively with minimum, medium and maximum capacity
of the burner.
• After the adjustment tighten knobs B.