Transport And Storage; Requirements For Product Use - Festo EHMB Serie Instrucciones De Utilizacion

EHMB
3

Transport and storage

· Take into account the weight of the rotation−stroke module. Depending on the
design, the EHMB can weigh up to 7 kg.
· Ensure the following storage conditions are met:
Short storage times
Cool, dry, shaded, corrosion−resistant storage locations.
4

Requirements for product use

Warning
Uncontrolled moving masses can cause
injury to people or damage to property
(squeezing).
· Energise the drive motors, at first limited
to low speeds and torques.
Note
The positioning times and permitted mass moments of inertia on the drive
depend to a large extent on the flange−mounted motor.
· Use the design tool Positioning Drives" from Festo to determine the
optimum combination of products (è www.festo.com).
Make sure that the following specifications are observed:
· Compare the maximum values specified in these operating instructions with
those of your actual application (e.g. forces, torques, temperatures, masses,
speeds).
Only compliance with the load limits allows operation of the product in
compliance with the relevant safety regulations.
· Take into consideration the ambient conditions at the location of use.
Corrosive elements in the environment (e.g. ozone) will reduce the service life
of the product.
· Comply with the regulations of the trade associations and the German
Technical Control Board (TÜV) and the VDE or corresponding national
conditions.
22
Fig. 2
Festo EHMB 0912NH English