F.
E.
J.
D.
CONTROL PANEL
The front panel of the Incubating/Cooling Mini Shaker contains all the controls and
displays needed to operate the unit.
A. Standby button/standby indicator light: The standby indicator light will illuminate
when the unit is plugged in. The unit will be in standby mode. Press the standby
button to activate the temperature, speed and time functions. The standby indicator
light will shut off and the temperature, speed and time displays will illuminate. Press
the standby button again and the unit will once again be in standby mode.
B. Temperature display: Displays the actual/set-point temperatures in conjunction
with the actual/set-point indicator lights. C. Up/down arrows for set-point control.
On/off button starts/stops the heating/cooling function. D. The temperature
indicator light will be illuminated when the unit is heating/cooling.
E. Actual indicator light: Illuminates when the temperature displayed is the actual
temperature of the air in the chamber.
G. B.
H.
K.
C.
I.
L.
F. Set-point indicator light: Illuminates when the set-point temperature is displayed.
G. Caution hot indicator light: Illuminates when the air temperature of the chamber
is above 40°C (104°F).
H. Speed display: Displays the speed of the shaker. I. Up/down arrows for set-point
control. On/off button starts/stops shaking function. J. The speed indicator light will
be illuminated when the unit is shaking.
K. Time display: Displays accumulated time (continuous mode) or how much time
is remaining (timed mode). The display range is from 0 to 9,999 minutes in one (1)
second increments. The display will indicate minutes and seconds until the timer
reaches 99 minutes and 59 seconds (99:59), then the display will automatically
display minutes up to 9,999. L. Up/down arrows for set-point control. On/off button
starts/stops the time function.
EN
A.
4