Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. When cooking is done, you will hear 3 beeps and the Timer will flash "00." Use a pot holder
or oven mitt to remove the Lid. Be careful to avoid escaping steam. Place the Lid on a heat-
resistant surface.
7. Slip the Hook Handle into the Tab at the top of the Shaft. Lift the Tower out of the unit by the
Hook Handle and place the Tower onto a large tray or pan. Using a pot holder, carefully slide
the food pieces off the skewers and serve.
TIPS FOR COOKING WITH YOUR SMART ROTISSERIE™
11. Always spray parts with non-stick spray for easier cleanup. This includes the
inside of the Lid, which may become covered with burnt on-grease vapors.
12. Use a tray, or large flat baking pan (like a 13" x 9" x 3"/33cm x 23cm x 8cm)
when positioning meats and birds on the Tower. Be sure the pan is on a flat surface. This
also works well when checking doneness, and/or removing cooked foods.
13. When cooking whole poultry, always try to use the Tower to help keep the bird higher in the unit
and out of the drippings. If necessary, cut the bottom cavity slightly larger to fit over the
Tower. If the bird doesn't fit on the Tower, use only the Drip Tray and Shaft. If the bird
seems very low in the unit, thread an orange on the Shaft first to help raise the bird up
out of the Drip Tray.
14. This product has High and Low heat settings. High is generally recommended
since it cooks foods more quickly and gives the best browning and crisping.
You may want to experiment with the Low setting. It works well for pot roasts
and is good when using sauces that tend to overbrown if cooked at a high
temperature. You may wish to start foods on the High setting, and then switch
to Low if foods are overbrowning or cooking too quickly.
15. Since this product cooks quickly, some foods do not brown well,
including hot dogs, link sausage, and 2 chickens at a time.
16. Remember, large birds (like a 10 lb./4.54 kg turkey) cook at a faster
rate per pound/kg than small birds (like a 1.5/.70 kg Cornish hen).
17. Try to select roasts that are evenly shaped for more even cooking. When positioning roasts
on the Shaft, be sure the Shaft is centered in the roast. If the roast has a narrow and
large end, position the large end up. It's more important for the Shaft to be centered in
the large end, than the small end.
18. Be sure to position the roast at the top of the Shaft rather than near the bottom. With some short,
wide roasts, it may be possible to let the roast rest on top of the Tower positioned on the Shaft.
19. When removing roasts from the Shaft, (especially small ones, like pork tenderloin), consider
cutting the roast off the Shaft by slicing it in half lengthwise. This will result in 2 long
lengths of meat that can then be sliced into serving pieces.
10. As with an oven roasted chicken or roast, let the cooked food cool for 10-15 minutes outside
the Rotisserie prior to slicing to give the juices a chance to settle.
7
Tabla de contenido
