Idiomas disponibles
Idiomas disponibles
I I I . Y O U R P O W E R L I F T R E C L I N E R
Lift Mechanism: Responds to the hand control commands to position the recliner in the sit and stand
positions.
Leg Levelers: Manually rotate up or down in order to stabilize the recliner before use (Fig. 3.2).
ROTATE THE LEG LEVELERS TO RAISE OR LOWER THE POWER LIFT RECLINER.
Figure 3.2 Leg Levelers
Scissor Mechanisms: Extend or retract to take the
power lift recliner through the various stages of recline
(Fig. 3.3).
WARNING! Pinch/Crush Points Hazard! Be aware
that the lift mechanism and scissor mechanisms
are a pinch point on the power lift recliner. Keep the
following items and similar objects clear of these
points when operating the power lift recliner:
appendages
small children
pets
wires
oxygen tubes, oxygen tanks, and portable
ventilators
loose items, including but not limited to clothing
and blankets
electrical power cords
Electrical Components
Your Pride Power Lift Recliner is equipped with a low voltage DC motor system that reduces the
standard household alternating current of 90V AC–264V AC to direct current (24/39V DC). The electrical
components include the external transformer, batteries (not included), and hand control. Keep these
areas free from moisture at all times.
WARNING! Keep all electrical components free from moisture at all times to prevent shock and/or electrical hazard.
External Transformer: Connects to a standard electrical outlet to provide power to the power lift
recliner. The transformer may be equipped with an LED indicator, which shows green when power to
the transformer is on.
The external transformer may also come equipped with mounting brackets that allow the transformer to
be mounted to the wall directly under the standard electrical outlet. The screws must be mounted to the
wall stud for security. Refer to "Appendix B" for a mounting diagram.
10
www.pridemobility.com
Figure 3.3 Scissor Mechanism
Power Lift Recliner Series
SCISSOR
MECHANISM
(PINCH POINT)
Capítulos
Solución de problemas
