Troubleshooting - DeLonghi AN125HPEK Instrucciones De Uso

TROUBLESHOOTING

PROBLEM
The air conditioner does not come on
The air conditioner wor s for a short
time only
The air conditioner wor s, but does not
cool the room
During operation, there is an unpleasant
smell in the room
The air conditioner does not operate for
about three minutes after restarting it
The symbol and one of the
following messages: HL/PF apper on
the display
CAUSE
it is not plugged into the electrical
receptacle
there is no current
the internal safety device has tripped
there are bends or in s in the air
exhaust hose
something is preventing the air from
being discharged
windows, doors and/or curtains opened
there are heat sources in the room (oven,
hairdryer, etc)
the air exhaust hose is detached from
the appliance
filter clogged
the technical specification of the
appliance is not adequate for the room
in which it is located.
the filter is clogged
prevents the appliance from being
restarted until three minutes have
elapsed since it was last turned o
the appliance has a self diagnosis system
to identify a number of malfunctions.
14
SOLUTION
plug into the electrical
receptacle
wait
call the Service Center
position the air hose correctly, eeping it
as short and free of curves as possible to
avoid bottlenec
s
chec and remove any obstacles
obstructing air discharge
close doors, windows and curtains,
bearing in mind the " TIPS FOR CORRECT
USE" given previously
eliminate the heat sources
fit the air exhaust hose in the housing at
the bac of the appliance (fig. 1).
clean or replace the filter as previously
described
clean the filters as previously described
wait. This delay is part of normal
operation.
see the SELF-DIAGNOSIS chapter