Assembling The Monitor; Electrical Installation; Monitor Wiring - SOMFY VSYSTEMPRO Manual De Instalación

[1]. Unclip the le -hand side of the front panel using a small flat screwdriver.
[2]. Turn the front panel to reveal the thumb-wheels and the selector located on the right-hand side of the monitor.
[3]. Gently pull the front panel to the le to remove it completely from the back.
[4]. Insert the electric cables into the circular cut-out provided for this purpose.
[5]. Fasten the back of the monitor using screws and plugs adapted to the type of wall.
The installation of the power supply must comply with the standards in force in the country in which the product is installed,
and must be carried out by qualified personnel.

4.1 Monitor wiring

[1]. Switch the power supply off.
[2]. Disconnect the monitor connectors.
[3]. Implement the wiring corresponding to the installation.
Removable terminal block 1
BUS1
BUS2
GND
12M
GND
VA
Removable terminal block 2
-DOL
+DOL
GNDA
LB
Copyright © 2016 Somfy SAS. All rights reserved.

3 ASSEMBLING THE MONITOR

125

4 ELECTRICAL INSTALLATION

Bus input
Not used
Not used
Common push button for buzzer
Push button input for buzzer
EN
5