GYS TIG 220 AC/DC Manual De Usuario página 23

Penetration and clea-
AC balance
ning (%)
AC frequency AC frequency
AC time T AC
DC time T DC
AC wave shape Wave shape
Spot time Welding duration
TACK time T Pulse
Electrode diameter Ø
Fe, CrNi, Cu/CuZn,
Metal to weld
AlMg, AlSi, Al99
Lap welding
Butt welding
Fillet welding
Vertical down weld
Thickness of the
workpiece
MMA process MMA
TIG AC process AC
TACK mode TACK
TIG AC MIX mode AC MIX
TIG DC process DC
SYNERGIC process SYN
Standard mode STD
Pulse mode PULSE
Spot mode SPOT
2T 2T
4T 4T
4T LOG 4T LOG
Languages
Interface lock
Interface unlock
Password modification
Parameters reset RESET
Identification ID
Backup menu
Save
Save as
Open
Delete
TIG 220 AC/DC
X Wave balance control of penetration and cleaning (%)
X AC welding frequency (Hz)
X AC welding duration in AC MIX (S)
X DC welding duration in AC MIX (S)
X AC wave shape : square, trapezium, triangle and sine.
X X Spot time (s)
X Spot pulse duration (s)
Recommended diameter of the tungsten electrode to optimise the arc igni-
X X
tion in SYNERGIC mode (mm)
Selction of the metal to weld: Steel, Nickel-Chromium, Cusi or brass, Alumi-
X X
nium-Magnesium, Aluminium-Silicon in SYNERGIC mode
X X SYNERGIC Mode.
X X SYNERGIC Mode.
X X SYNERGIC Mode.
X X SYNERGIC Mode.
X X Thickness adjustment of the workpiece in SYNERGIC mode
X
X
X
X
X
X X
X X
X X
X X
X X 2T (time) torch mode
X X 4T (time) torch mode
X X 4T (time) LOG torch mode
X X X Language selection
X X X Locking the interface to prevent access to menus and parameters
Unlocking the interface to allow access to menus and parameters (default
X X X
code: 0000)
X X X Allow the modification of the password
X X X Allow to restore to factory settings
X X X After Sales module to identify the machine
X X X Menu to access to welding parameters features.
X X X Save the welding settings under the existing name.
X X X Save the welding parameters under a new name.
X X X Open an existing saved setting
X X X Delete an existing saved setting
EN
23