Automatic Cool-Down; Cycle Count; Cycle Programming; Cycle Options - Alliance Laundry Systems V Serie Manual De Instrucciones

Automatic Cool-Down

If "CooL" is selected, the automatic cool-down
feature is enabled. If the wash solution is 140°F
(60°C) or higher when a cycle step calls for a drain,
the washing action will continue and the cold water
valve will begin flushing cold water into the wash
solution. Once the wash solution temperature drops
below 140°F (60°C), the drain opens and the cycle
continues as programmed. If "noCL" is selected,
this feature is disabled.

Cycle Count

To display the current cycle count, press the Start
key while the display is showing the temperature in
the sump. The display will show a 2-digit number
indicating how many cycles have been run to
completion (cycles which were stopped in progress
are not counted). Press the Start key to return to
PROGRAM mode without resetting the count.
Press the Up or Down key to reset the count to zero
and return to PROGRAM mode.

Cycle Programming

To edit an existing cycle or create a new cycle, press
the Up key while the display is showing the
temperature in the sump. The display will show
"CY01." Press the Up or Down key until the
desired cycle number is displayed. Press the Start
key to begin editing the selected cycle.

Cycle Options

Cycle options are programmable options that are in
effect for the duration of the selected wash cycle.
These options include:
l Agitation action
l Agitation speed
l Recirculation pump enabled or disabled (for
possible future application)
F232072
Programming
Cycle option settings are unique to the cycle
Note:
for which they are programmed.
Use the Up or Down key to change the selected
option. Use the Start key to accept the selected
option and move on to the next one.

Agitation Action

There are four agitation actions from which
to choose:
Agitation Action Options
Display Description
27 seconds forward,
3 seconds pause,
Ag 1
27 seconds reverse,
3 seconds pause
10 seconds forward,
20 seconds pause,
Ag 2
10 seconds reverse,
20 seconds pause
3 seconds forward,
27 seconds pause,
Ag 3
3 seconds reverse,
27 seconds pause
4 seconds forward,
56 seconds pause,
Ag 4
4 seconds reverse,
56 seconds pause
The selected agitation applies to the entire cycle. It
is possible to progam a different agitation action for
each of the 30 cycles.
Percentage
90%
33%
10%
6.7%
25