Keypad - Alliance Laundry Systems V Serie Manual De Instrucciones

Operation
Theory of Operation
Never turn the power off while the computer
Note:
mode switch is in the PROGRAM position. Such
action will disorder portions of the programmed
data, necessitating reprogramming of some or all of
the existing cycles. Always return the mode switch
to RUN position before turning the power off.

Keypad

Operation of the V-computer control is performed
with a 4-key touch keypad and LED display located
on the front of the machine. See Figure 3 for
domestic and international versions of the keypad.
Up Down
Domestic
14
(Continued)
Out-of-Balance
Condition
High Water
Level
Medium Water
Level
Water
Level
Start Stop
The following table describes the function of the
individual keys when the machine is in RUN mode.
Key
Used in cycle selection; pressing this key moves
Up
among cycles from smaller to greater.
Used in cycle selection; pressing this key moves
Down
among cycles from greater to smaller.
Start Used to start a cycle.
Stop
Used to stop a cycle.
Low
Figure 3
Keypad
Description
International
R076RE3A
F232072