HAMPTON BAY 91100 Guía De Uso Y Cuidado página 14

Assembly - Attaching the Lights
1
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
IMPORTANT: It is critical to attach the light kit using the quick
connector. The fan will not operate unless the light kit is
connected to the fan.
NOTE: Notice the location of the fan's slide switch. This is the
switch used to change the fan's directional rotation. For more
information on the operation of this switch, see Operating
Your Fan on page 15.
NOTE: This light kit cannot be transferred to another fan.
□
To attach the light kit fitter assembly (H), remove the non-
slotted screw (NN) from the fan-motor assembly (E), and
loosen, but do not remove the other three screws.
□
Connect the blue wire existing the fan motor assembly (E)
with the black wire from the light kit fitter assembly (H) by
engageing the molded adaptor plug.
□
Connect the white wire existing the fan motor assembly (E)
with the white wire from the light kit fitter assembly (H) by
engageing the molded adaptor plug.
□
Carefully tuck all wires.
2
Installing the bulbs and attaching
the glass bowl
WARNING: Do not overtighten when installing the glass shade into
the light kit assembly. Allow the glass shade to cool completely
before removing.
□
With the power off, install the LED bulb (Max. 9.5-watt,
included) by screwing into the light bulb sockets.
□
Place the glass bowl (I) into the light kit assembly (H), aligning
the three flat areas on the top flange of the glass bowl (I) with
the three raised dimples in the light kit assembly. Turn the
glass bowl (I) clockwise until it stops.
□
Position the light kit assembly (H) onto the fan motor assembly,
aligning each of the four holes.
□
Rotate the light kit assembly (H) clockwise to engage the three
mounting screws with the three key holes slots, tighten the
screws.
□
Re-install the non-slotted screw (NN) that was removed in step
1 and tighten firmly.
H
NN
L
14
E
H
I