HAMPTON BAY 91100 Guía De Uso Y Cuidado página 10

Assembly - Hanging the Fan (continued)
5
Wiring the receiver to the household wiring
WARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge or
experience, contact a licensed electrician.
WARNING: Each wire not supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.
IMPORTANT: Use the wire connecting nuts (AA) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
□
Spread the wires apart so that the green and white wires
are on one side of the outlet box and the black wire is on the
other side.
□
Connect the green fan wires to the household ground wire
(this may be a green or bare wire) using a wire connecting
nut (AA).
□
Connect the receiver black (or red) wire to the household
black (hot) wire using a wire connecting nut (AA).
□
Connect the receiver white wire to the household white wire
(neutral) wire using a wire connecting nut (AA).
□
Secure each wire connecting nut using electrical tape.
Black
Black
(or Red)
10
Outlet Box
in the ceiling
(MM)
Green (or Bare)
AA (x3)
White
Green
White
Receiver
Antenna
Receiver (J)