General Care & Cleaning - Kenmore 790.3667 Serie Manual De Uso Y Cuidado

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

General Care & Cleaning
(cont'd)
C_eaning the Burner
Grates,
Burner
Caps, Burner
Heads
Surface
Burner
Grate
The Burner Grates, Burner Caps, and Burner Heads shouUd be routineUy cUeaned,
Keeping the burner ports dean wHU prevent improper ignition and an uneven
flame at each burner position, Refer to the following instructions:
To Remove and Replace the Surface Burner Grate, Surface Burner Cap and
Surface Burner Head - Remove in the following order; (1 st) Surface Burner
Grate, (2nd) Surface Burner Cap, (3rd) Surface Burner Head (See Figure 1),
Surface
Burner
Reverse the procedure above to repUacethe Surface Burner Cap, Surface
Burner Head and Surface Burner Grate, Do not remove any burner parts from
the cooktop
until the burner parts have completely
cooJed and are safe to
handte, Do not operate the surface burners without
the Surface Burner
Caps, Surface Burner Heads and Surface Burner Grates properly
in ptace,
Gas
Opening
Figure 1
To Clean the Burner Caps, Burner Heads and Grates - Use a soap=filled
scouring pad or a mild abrasive cleanser to clean the surface burner caps and
surface burner heads, The Grates and the outer vent covers are designed to be
Dishwasher safe for cleaning, The ports (or slots) around the burner heads must
be routinely cleaned, If residue still remains in these ports, use a smaIFgauge
wire or needle to clean the slots or holes, For proper flow of gas and ignition of
the burner--DO
NOTALLOW
SPILLS, FOOD, CLEANING AGENTS OR ANY
OTHER MATERIAL TO ENTER THE GAS GAS OPENING. ALWAYS keep the
surface burner cap and surface burner head in place whenever a surface burner
is in use,
Surface
Burner
Surface
Burner
Surface
Burner
OuterVent
Grate
Caps
Heads
Covers
THE COOKTOP IS NOT REMOVABLE.
Do not attempt to remove or lift the cooktop,
THE FIXED OVEN VENT IS NOT REMOVABLE.
Do not attempt to remove the fixed oven vent
cover,
Use caution when replacing the burner cap so the electrode is not damaged, This may cause a delayed
ignition or prevent the burner from igniting,
Any additions, changes or conversions required in order for this appliance to perform satisfactorily must
be made by Sears Service, Call 1-800-4-MY-HOME®
(See back cover),
23

Capítulos

Tabla de contenido
loading

Tabla de contenido