Iii.1.A Air Treatment - THERMEx Le Mans I Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

EN 
On the front part there must be an opening of no less than 5 mm (Fig.3.5 dimension a).
It is recommended to install the appliance only after having installed the kitchen base
Fig. 3.5
cabinet in order to avoid eventual damages to the glass hob.
III.1.a AIR TREATMENT
The appliance has been designed for the treatment of the cooking fumes. The appliance
may be installed in duct-out or filtering mode (with active charcoal filters kit or with
plasma filter kit both separately purchasable).
Duct-out. The kitchen fumes are expelled outside through the pipe (not supplied
with the hood) connected to the engine exhaust fitting.
Warning! The piping must never be connected to combustion discharge
pipes (stoves, boilers, burners, etc.)
The use of long pipes, with many bends, corrugated and with a diameter smaller than the
motor outlet's will cause a decrease in extracting performance and a noise increase.
Filtering (recycling). The fumes pass through the active charcoal anti-odour
filter (not supplied with the hood) to be purifed and recycled in the kitchen.
Fig. 3.5
10 
Tabla de contenido
loading

Tabla de contenido