Bosch SHI66A Manual Del Usuario página 19

Ocultar thumbs Ver también para SHI66A:
Tabla de contenido
Figure 6/llus. 6
Figure 7/llus. 7
Figure 8/llus. 8
Figure 9/llus. 9
Figure 10/llus.
10
r
English
(Loading
the Upper Rack, continued)
Depending on the model dishwasher you
have, the upper rack may have features
and accessories that witt add to its loading
versatility. These features and accessones
inctude height adjustments and fold-down
flip tines and cup shetves. Check with the
Model Features Chart on page 6 in this
manual to find out which features or
accessories your dishwasher
has.
The upper rack of many models of Bosch
dishwashers is adjustable in one of two
ways: 1) the Standard Upper RackAdjust-
ment, or 2) the RackMatic
TM
Adjustment.
Look to the Model Features Chart on page 6
in this manual to verify if and which feature
your dishwasher has before you attempt
the adjustment.
Using the Standard
Upper Rack
Adjustment
1) Remove the empty upper rack by
pulling it out of the dishwasher to the
point that it can be lifted upward, as
shown in Figure 6.
2) Pull the rack outward and up until the
rollers are completely free of the roller
guides.
3) Re-insert the rack with the other set of
rollers on the roller guides, as shown in
Figure 7.
Using the RackMatic
TM
Adjustment
To lower the upper rack:
1) Pull the upper rack out of the
dishwasher until it stops rolling.
2) Grasp the rack as shown in Figure 8.
3) Press the RackMatic
TM
handles inward,
as shown in Figure 9, and let the rack
drop gently while supporting it with your
hands.
To raise the upper rack:
4) Pull the upper rack out of the
dishwasher until it stops roiling.
5) You do not need to press the
RackMatic
TM
handles to raise the rack.
Grasp the upper rack by the upper edge
and gently pull it upward, as shown in
Figure 10, until the RackMatic
TM
handles
lock the rack into position.
6) Before you push the upper rack back
into the dishwasher, ensure that the
rack height is the same on both sides.
Otherwise, the dishwasher door wilt not
close and the upper spray arm wilt not
connect to the water circuit,
18
Operation
E Fonctionnement
I Operacibn
Tabla de contenido
loading

Tabla de contenido