Telephone Installation - golmar TL4003ML Manual De Instalación

51
To open the telephone insert
a plain screwdriver into the slots and
rotate it as shown.
Close the telephone as shown on the picture.
Once the telephone is closed, connect the handset
using the telephone cord and put it on the craddle.

TELEPHONE INSTALLATION

b
d
a
c
e
Avoid to place the telephone near to heating sources,
in dusty locations or smoky environments.
The telephone can be fixed using an electrical embedding
box or directly on the wall, as shown on the picture.
If the telephone will be installed directly over the wall,
drill two holes of Ø6mm. on the specified positions,
using 6mm. wallplugs and Ø3,5 x 25mm. screws.
Pass the installation wires through
the corresponding hole and
connect them as shown on the
installation diagrams.
D
escription of the T-902 telephone.
a. Telephone handset.
b. Speaker grille.
c. Microphone hole.
d. Subjection hole.
e. Telephone cord connectors.
f. Additional push button.
g. Door release push button.
h. Hook switch.
f
g
e
h