Bosch GKS18V-25GC Instrucciones De Funcionamiento Y Seguridad página 16

1600A01UV3.qxp_GKS18-25 4/27/20 8:12 AM Page 16
charge.
Glowing yellow and only one bar indicates
that the battery needs to be charged or
replaced soon.
Glowing red and only one bar means that
the battery charge is depleted.
TEMPERATURE INDICATOR
If the temperature indicator 3g is glowing
yellow, the critical temperature of the
motor, electronics or battery has been
reached. Run the power tool at no load and
allow it to cool down.
If the temperature indicator is glowing red,
power tool is overheated and will switch
off. Allow the power tool to cool down.
SMARTPHONE STATUS INDICATOR
It is necessary to purchase and install a
Bosch connectivity module and install the
'BoschToolbox' app to receive information
and messages
smartphone status indicator. See the
Connectivity chapter on the next page.
Green Smartphone status indicator 3e
means that there is non-critical information
available in the 'Bosch Toolbox' app for
user to read.
Yellow smartphone status indicator 3e
means that there is important information
available (e.g. temperature warning).
Red smartphone status indicator 3e means
that there is critical information available.
It is recommended that the user reviews
the message immediately.
POWER TOOL STATUS FRAME
Green light of the power tool status frame
3f means everything is functioning
properly.
Yellow light means that:
a. Critical temperature has been reached
(the temperature indicator 3g is also
glowing yellow) - run the tool at no load
and allow it to cool down, or
b. Battery is almost depleted (the battery
charge indicator 3a is also glowing
yellow) - charge or replace the battery
soon.
Red light means that:
a. The tool is overheated (the temperature
indicator 3g is glowing red) – turn the
tool off and on again, or
b. Battery is depleted (the battery charge
indicator 3a is also glowing red) -
16
Operating Instructions
as alerted by the
Fig. 9a
Fig. 9b
charge or replace the battery.
Flashing blue light means that the power
tool is connected to a mobile device or
settings are being transferred. The user
must press the user interface button 3c to
accept and store the new setting(s).
Connectivity
To reduce the risk of
injury
operating instructions included with
Bosch connectivity module. Operating
instructions for connectivity module
include important information not covered
in this manual.
This power tool is Bluetooth capable and
select features can be adjusted remotely
using a mobile device. Utilizing these
features requires installation of a Bosch
Bluetooth connectivity module and a
mobile device with the Bosch Toolbox app
installed.
If connectivity module is not purchased
with the tool, or if the replacement of the
module or the battery becomes necessary,
please follow this procedure (See Fig. 9a):
- Using a flat screwdriver or a coin,
A
B
C
A
D
read the