First Installation; The Best Position In The Car - CYBEX Pallas 2-fix Guia Del Usuario

Ocultar thumbs Ver también para Pallas 2-fix:
Tabla de contenido

fIRST INSTAllATION

insert the linear Side-impact Protection (l.S.P. System) pads on both sides into the
mounting holes (B), then push down until they click into place.

ThE BEST POSITION IN ThE CAR

the CYBEX Pallas 2-fix can be used without iSofiX-ConnECt on all
vehicle seats with a three-point automatic retractor belt, assuming the seat
is approved for adults.
Warning! Do not use the child seat with a two-point belt or a lap belt. When
securing your child with a two-point belt, the child may sustain lethal injuries in
an accident.
When installing the CYBEX Pallas 2-fix with iSofiX-ConnECt system (o),
the child seat falls into the "semi-universal" admission category, i.e. it may
only be used in certain types of vehicles. Please refer to the list of approved
cars to check your vehicle's compatibility. the list is updated regularly and
the latest version can be accessed online at www.cybexonline. com.
Please note the following exceptions, when the child seat may be used on the
passenger seat:
– In cars equipped with an airbag please push the passenger seat as far back as
possible. Please make sure that the upper point of the vehicle seat belt stays
behind the belt guide of the child seat.
– Strictly follow the recommendations of the vehicle manufacturer.
Warning! The seat belt (f) must run diagonally from the back und must never
lead to the front upper belt point of the seat in your vehicle. Should you be
unable to adjust this, for example by pushing the seat to the front or by using
the child seat on a different seat in the car, then the child seat is not suitable for
this vehicle.
luggage or other objects in the vehicle which may cause injuries in an accident must
always be secured properly. loose parts may turn into deadly projectiles during an
impact.
Warning! for vehicles with seats that are positioned sideways, the use of this
child seat is not permitted. for seats that are positioned backwards, e.g. in
a van or minibus, the use of the child seat is permitted, assuming the seat is
approved for adults. Please ensure that the headrest is not taken off when
installing the child seat on a rearward facing seat! The child seat must have the
seat belt fastened even when not in use. This is necessary to avoid the driver
or passenger getting injured by a loose child seat when making an emergency
stop or in case of a crash.
Note!
Please never leave your child unattended in the car.
8
Tabla de contenido
loading

Este manual también es adecuado para:

Solution x2-fix

Tabla de contenido