Error Messages (What They Mean) - Brother QL-650TD Guía De Configuración Y Uso

60
STEP4 Maintenance and Troubleshooting
Problem
•
The label gets
jammed
around the
cutter unit
•
The label is
not ejected
properly after
printing
•
The icon of
P-touch Add-In
is not
displayed on
®
Microsoft
Word
•
I would like to
clear the
printer settings
and the data
transferred
from the PC.

Error messages (what they mean)

Error message
System Error
No.*!
Please Close
Cover!
Cutter Error!
Paper Cannot
be Fed!
Roll End!
Please Insert
Label Roll!
•
Is the blade of cutter getting dull?
Does the cutter error occur frequently?
Replace the cutter unit. For details, refer to
unit" in page 56.
•
Isn't dust or other foreign object gotten on the roller?
Clean the roller using the cleaning sheet. For details, refer to
"Roller maintenance" in page 54.
•
Is the label outlet stained?
Remove stains from the label outlet. For details, refer to
outlet maintenance" in page 55.
®
•
Isn't Microsoft Outlook
®
Isn't Microsoft Word selected for the editor usually used for
®
Microsoft Outlook
Due to limitation of the program, the Add-In of Microsoft
unable to use with above settings. Quit Microsoft
®
restart Microsoft Word.
•
Reset the printer.
Press the ON/OFF button while at the same time holding the Up
arrow button and Feed button with the power supply off. The printer
is reset and its settings and data transferred from the PC is cleared.
The clock and date settings are not cleared with this action.
Cause
A system error occurs.
The DK Roll cover is open.
The cutter is not located to the
home position.
The DK Roll is not fed properly.
Or, the DK Tape is finished up.
The DK Label is finished up.
Printing or cutting is operated
without setting DK Roll.
Solution
®
started up?
®
?
Contact your service representative.
Close the DK Roll cover and do
the operation over again.
Turn off the printer, and then turn
the printer on again.
If the problem cannot be
corrected, contact your service
representative.
Set the DK Roll properly again. If
the DK Tape is finished up, set
the new roll.
Set the new DK Label.
Set the DK Roll.
"Replacing the cutter
"Label
® ®
Word is
® ®
Outlook , and
Solution