Dometic OVG340I Instalación Uso Y Mantenimiento página 35

OVG340I - OV1800 - OVN1800I
Manual ignition of the oven
If the electronic ignition does not work, the manual ignition is used as a substitute.
h To turn on the flame, fully press the control knob and rotate from the minimum
flame to the maximum flame position (Fig. 5, page 6).
h Simultaneously ignite the burner with a match or gas lighter.
Once the flame has been generated, press the knob down for a few seconds so
h
that the flame remains lit.
CAUTION!
If the burner does not turn on:
● check that there is gas in the cylinder.
If the device does not work, close the gas inlet tap and contact your
dealer.
Regulating the oven flame
To adjust the flame, turn the knob to the desired position (Fig. 5, page 6).
h
Position
Temperature
Position
Temperature
NOTE
As soon as the oven burner flame is turned on, it remains at the maximum
flow rate in all potions of the knob and then automatically decreases to
the minimum flow rate when the set oven temperature is reached.
EN
OVG340I
120 °C
OV1800 - OVN1800I
2
150 °C 200 °C
240 °C
4 6
240 °C
Use
35