OVG340I - OV1800 - OVN1800I
Manual ignition of the grill
If the electronic ignition does not work, the manual ignition is used as a substitute.
h
To generate the flame, fully press down the control knob and turn it from
position grill (Fig. 5, page 6).
h
Simultaneously ignite the burner with a match or gas lighter.
Once the flame has been generated, press the knob down for a few seconds so
h
that the flame remains lit.
CAUTION!
If the burner does not turn on:
● check that there is gas in the cylinder.
If the device does not work, close the gas inlet tap and contact your
dealer.
Regulating the grill flame
The grill is to be used only at its rated thermal capacity.
h
7.4 Visual inspection of the flame
Depending on the type of gas used, the flame appears as follows:
● Propane (G31): flame with blue internal pin point and clear outline.
● Butane (G30): flame with slight yellow tips when igniting the burner; these tips
intensify as the burner heats.
7.5 Accessories
The rack and drip pan have a block that prevents accidental extraction (Fig. 6, page
7).
For a correct insertion, the blocks must be facing upwards and toward the inside of
the appliance.
To extract, slightly lift the front of the rack or the drip pan.
EN
Use
37