Operation Matrix - Endress+Hauser RIA 550 Manual De Utilización

Process display

6. OPERATION MATRIX

Open operation using "E" for 3 sec. Select the line using the +/- push buttons.
Select individual addresses using "E" . Change the addresses using the +/-
push buttons.
(Input of operation code is required: 6051 or 50; 7049 in the SERV group).
Leave operation using "E" >3 sec.
FUNC PROG
Program
CH1 RANG DIM
Chan. 1 Meas. Eng.
range units
CH
CH2 RANG DIM
Chan. 2 Measure Eng.
(*5) ment units
range CH
LIM1 MODE SP
Relay 1 Mode Limit
Bargraph (*7) arrow
1 (*2) (*7)
LIM2 MODE SP
Relay 2 Mode Limit
Bargraph (*7) arrow
1 (*2) (*7)
LIM3 MODE SP
Relay 3 Mode Limit
Bargraph (*7) arrow
2 (*6) (*2) (*7)
LIM4 MODE SP
Relay 4 Mode Limit
Bargraph (*7) arrow
2 (*6) (*2) (*7)
SERV PRES TEST
Service Do Test
preset function
30
FILT DP SCLO
Filter Decimal Lower
time point scale
in sec.
FILT DP SCLO
Filter Decimal Lower
time point scale
in sec.
HYST End
Limit
hysteres
(*1) Address only available with option
(*2)(*7)
(*2) Access only when modes MIN or MAX
HYST End
Limit
(*3) Access only if calibration has been
hysteres
(*2)(*7)
(*4) Access only if calibration has been
HYST End
Limit
Universal input is available.
hysteres
(*5) Line only available on a 2 channel
(*2)(*7)
(*6) Line is locked in the 1 channel version
HYST End
(*7) Can be changed without release code
Limit
hysteres
(*2)(*7)
DINT BINT CALF
Display Bargr. Release
Intensity Intensity calibra-
tion
Operation matrix
SCHI BGLO BGHI
Upper Low High
scale bar- bar-
graph graph
SCHI BGLO BGHI
Upper Low High
scale bar- bar-
graph graph
Universal input
are selected under MODE.
released (CALF=YES)
released (CALF=YES) and the option
CALR CAL DADJ
Calibrate Calibra- Calibrate
range tion display
(*3) (*3) (*5)
End
TEMP
Comp.
temp.
(*1)
TEMP End
Comp.
temp.
(*1)
RTMP End
Internal
compen-
sation
temp.
(*1)