CAPITAL SPORTS Evo Air Manual De Instrucciones página 46

EN
46
1 Connect the sensor as the above picture, ensuring that all pins are
straight. Failure to do so will result in console malfunction.
2 Install the console (9) into the front post (7) with the screws
M5*14H (68).
3 Put the pulse sensor wires (19) on the handle bar (8) into the hole that
on the front post (7) and pull it out. Fix the handle bar (8) with the
screws M8*1.25 * 20L (63) and washers (64) properly and tighten it by
spanner. Be careful not to snag the pulse sensor wire connected to the
handle bar as it will affect the heart rate measurement.
4