General Safety Regulations - Holmatro DPU 31 PC Manual De Instrucciones

EN
Always adhere to these regulations and to the locally prevailing safety regulations, and proceed very
carefully.
Inform all people involved in the activities of the operation about these safety regulations.
2.2 Model plate and CE marking on the equipment
Refer to Fig. 1.
All pictograms attached to the equipment pertaining to safety and danger must be complied with and
remain clearly legible.
WARNING
Not following these instructions can result in serious personal injury, fatal accident, damage
to the system or consequential loss.
/i
Type of mark Position Description
Instruction A
Indication B
Warning C
D
Model plate E
2.3

General safety regulations

• Use this equipment solely for the activities for which it was designed. If you are in doubt or
uncertain, always consult your Holmatro dealer.
• Replace illegible safety symbols, pictograms and information labels with identical ones, available
from your Holmatro dealer.
• Varnished, plastic and rubber parts are not resistant to corrosive acid or liquid. Except for electrical
parts, rinse parts that have come into contact with corrosive acid or liquid with a lot of water. Consult
your Holmatro dealer for a resistance list.
• Prevent dirt in and on the couplers.
• Protect equipment against sparks during welding or grinding activities.
• Avoid an unhealthy posture while working. It can result in physical complaints.
28
• Read the user manual before use.
• Wear a helmet with safety goggles/face shield.
• Wear protective clothing that covers the entire
body.
• Wear safety gloves.
• Wear safety shoes.
Minimum and maximum noise level during operation.
Danger of burns from the exhaust during use and
immediately after use.
• Do not touch the exhaust if it is hot.
• Let the engine cool down before storing it.
Danger of burns from hot exhaust gases.
• Keep at a distance.
Danger of asphyxiation from poisonous exhaust gases
containing carbon monoxide.
• Keep at a distance.
• Never use the equipment in confined spaces.
• Make sure there is enough ventilation.
Manufacturer's information stating: name, address, CE
marking, model indication, serial number and date of
construction, maximum operating pressure, weight if
heavier than 25 kg.
916.000.116_004
Part number
920.299.572
920.000.035
920.000.026
920.000.027
-
DPU 31 PC