SOMFY Sonesse 30 DCT Guia De Instalacion página 6

COMMISSIONING
Checking the direction of rotation
Press the setting tool UP button:
a) If the shade is raised, the direction
of rotation is correct. Move to the sec-
tion entitled «Adjusting the end limits».
b) If the shade is lowered, the direction
of rotation is incorrect. Move to the
next step.
Press the setting tool STOP button
until the shade jogs: the direction of
rotation has been modified.
Press the setting tool UP button to
check the direction of rotation.
Adjusting the end limits
The limits can be set in any sequence.
1) Press and hold the UP button to
move the shade to the desired up
position.
2) Press simultaneously the STOP and
DOWN buttons and release them once
the shade begins to move.
The up limit is memorized.
3) Press the STOP button when it
reaches the desired down position.
If necessary adjust the down position,
using the UP or DOWN buttons.
4) Press simultaneously the STOP and
UP buttons and release them when
the shade begins to move.
The down limit is memorized.
The shade moves up and will stop at
its upper limit.
5) To confirm the end limits press and
hold the STOP button until the shade
jogs.
The end limits are recorded.
4
a
b
1
3
5
Copyright © 2008 Somfy SAS. All rights reserved - V0 - 11/2008
2
4