Transfer Page - Urmet 1083/48 Manual De Instrucciones

. The value of the previously set DOOR UNIT TYPE parameter.
: The DOOR UNIT TYPE is main (as in this case) or
B This area shows the list of buttons present on the device and their association with the columns and apartments
present in the system.
If the ADVANCED CALL BUTTON CONFIGURATION was previously enabled, the function of the
button can be changed by choosing from the following parameters:
– CALL APT (call apartment)
– CENTRAL Switchboard
– SPECIAL FUNCTION (activate special decoder)
– NOT ASSIGNED
You can configure a button for a special function, such as turning on the staircase light.
At the button you want to configure, press the "Function" drop-down menu, select the "Special function" item
and assign the code you want to send. .
The special function will only be activated if a specially programmed special decoder has been
installed.

3.4 TRANSFER PAGE

From the SETTINGS
page opens:
Here you can:
• Forward to the audio or audio-video door unit the configuration described above, which will be stored in the
device using the control
The following screen will open afterwards, when the configuration has been sent to the device:
• The browser shows the following screens:

page you can go to the TRANSFER web page by pressing the control
1)
.
.
)
; the following
DS1083-099