How To Reset Default Settings - Urmet 1083/48 Manual De Instrucciones

Ocultar thumbs Ver también para 1083/48:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
Press
• Save a file containing the configuration on the terminal (personal computer, smartphone or tablet) using
The file will be named config_5ECF7F2534D5_20180619154700.json (5ECF7F2534D5 is the MAC
address of the device while 20180619154700 is the date and time of saving) and will be saved in the
default download folder set on the terminal.
Finally, with the control
to be imported by pressing
4

HOW TO RESET DEFAULT SETTINGS

Press the PROGRAM button (10) briefly to go to configuration state. The LEDs (1) will blink during this step.
Then hold the BUTTON (7) pressed for longer than 10 seconds.
The door unit will generate two 2-second long beeps and all parameters will be reset before exiting configuration
state.
For the following topics, please see instruction booklets:
LBT048, provided with door units Ref. 1083/48 and /38,
and LBT0566, provided with door unit Ref. 1083/39.
• SPEAKER VOLUME ADJUSTMENT
• DDA (Disability Discrimination Act) LED ACTUATION - SYSTEM STATUS INDICATION
• PEDESTRIAN LOCK ACTUATION
• GARAGE GATE LOCK ACTUATION
• INSTALLATION CONSTRAINTS
• CONNECTION EXAMPLE
• TECHNICAL SPECIFICATIONS
• SIMPLIFIED EU DECLARATION OF CONFORMITY
DS1083-099
to end the configuration procedure.The following message will be shown:
.
and create a backup copy of all the settings made on the door unit.
, you can choose a configuration file (previously saved in the default folder)
, for example on a new door unit without configuration.
3
Tabla de contenido
loading

Este manual también es adecuado para:

1083/381083/39

Tabla de contenido