Alternate Setup; Set Up Your System Using A Computer; Before You Begin; Computer Setup - Bose WAVE SOUNDTOUCH IV Serie Guia Del Usuario

Set up your system using a
computer
You can set up your system using a computer rather than a
smartphone or tablet.

Before you begin

• Position your system next to your computer.
• Make sure your computer is on your Wi-Fi network.
• Obtain a USB A to USB Micro B cable (not provided).
Notes:
• A USB A to USB Micro B cable is commonly used for charging
mobile devices. You can also purchase this part at your local
electronics store. If you don't have this cable, contact Bose
customer service to receive this part.
• The USB connector on the back of your system is for computer
setup only. The USB connector is not designed to charge
smartphones, tablets, similar devices or the system itself.

Computer setup

During setup, the app prompts you to temporarily connect the USB
cable from the computer to your Wave® SoundTouch® music system.
Do not connect the USB cable until the app instructs you to do so.
1. Plug the power cord into an AC (mains) power outlet.
2. On your computer, open a browser and go to:
global.Bose.com/Support/WSTIV
Tip: Use the computer where your music library is stored.
3. Download and run the SoundTouch® app.
The app guides you through setup.
4. After setup is complete, disconnect the USB cable from your
computer and system. Move your system to its permanent
location.
A LT E R N AT E S E T U P
E N G L I S H - 2 5