Securing The Gear Motor - Vimar Elvox ESM7 ACTO 404D Manual Para El Conexionado Y El Uso

Fig. 12

Securing the gear motor

To secure the gearmotor to the plate, with reference to Figure 14, proceed as follows:
1 - Remove the two screw covers C.
2 - Place the gearmotor on the plate, making sure that the threaded bars enter the holes.
3 - Using the 4 washers R and 4 screws D, lock the gearmotor.
4 - The slotted holes F enable adjusting the distance of the motor from the gate leaf.
18
Fig. 13
25 mm
25 mm
C
Max 20 mm
D
R
F
Fig. 11
25 mm
25 mm
Max 20 mm
25 mm
Fig. 14
25 mm
Max 20 mm
EN