General Features; Technical Characteristics; Technical Specifications; Electrical System Set-Up - Vimar Elvox ESM7 ACTO 404D Manual Para El Conexionado Y El Uso

General features

Automation system, ESM7, for residential sliding gates. The non-reversible, electromechanical operator is equipped with a low-voltage 24 V DC motor and a
mechanical release which enables the gate to be opened and closed manually. The motor operates a gear unit, lubricated with permanent grease, which is
enclosed in a thick but extremely compact die-cast aluminium housing. The electronic control board is integrated in the body of the operator, with the provision
of a housing for the back-up battery (optional).

Technical specifications

Control unit power supply
Electric motor power supply
Electric motor power consumption
Maximum gate leaf length
Maximum gate leaf weight
Opening speed
Maximum torque
Frequency of use
Protection rating
Operating temperature
Pinion for rack
Operator dimensions
Electrical system set-up (standard system)
Key
1 - Gear motor
2 - Rack
3 - Photocells
4 - Flashing light with aerial
5 - Selector

Preliminary checks

For the automation system to function properly, the structure of the existing gate, or the one to be made, must meet the following requirements:
- The wheels of the gate are mounted in such a position as to provide stability to the gate and are in a good condition and efficient.
- The rail is clear, straight and clean throughout its length with mandatory stops for both opening and closing.
- The top guide is aligned with the rail, the sliding blocks are intact and lubricated and with a clearance of approximately 1 mm. on each side so as to facilitate
the sliding of the gate leaf.
- The spaces between the moving and fixed parts of the gate are of the size required by the national standards or in any case comply with safety standards
by applying an adequate protection system.
- The weight of the gate must not exceed 400 kg
- No mechanical closing locks. It is recommended to take the necessary steps to ensure the reliability and safety of the automation system
14
Input current
Type of use
Noise
Weight
2x0.5 mm
2
1
230 V~
120/230 Vac
230 Vac /120 Vac 50/60 Hz
3
2
2x0.5 mm
2
3x1.5 mm
2
0.6 A
24 Vdc
80 W
6 m
400 kg
10 m/min
9 Nm
Residential
50 %
IP44
-20°C / +55°C
M4 Z14
<70 dB
295x185x270 mm
6 kg
4
2
2x1 mm
+ RG58
3
2
2x0.5 mm
5
3x0.5 mm
2
EN