Installation; Installing The Motor Unit And Drive Boom - Vimar ELVOX EN05 Instrucciones De Montaje Y De Manejo

Reference:
When using and installing accessories,
always observe the specific instructions in-
cluded with the equipment.

6. Installation

6.1 Installing the motor unit and drive boom

1. Insert unlocking pin.
2. Mount door link.
6.1.1 Mounting in line
Attention!
The drive boom must be carefully mounted on the motor unit.
Do not use force, as this could damage the gear teeth!
6.1.2 Mounting at right angles
Attention!
- The drive boom must be carefully mounted on the motor unit.
Do not use force, as this could damage the gear teeth!
- To ensure that the drive system functions properly, the reference point button must be turned through 90°.
EN
1. Insert securing sleeve.
2. Mount lintel joining plate.
1. Put adapter sleeve onto drive shaft.
2. Mount the rail on the motor housing.
1. Push the adaptor sleeve onto the drive shaft
2. Position the reference point button correctly
3. Mount the rail on the motor housing
Unlock carriage.
25