6
|
chapter 3: blower/vac assembly
Converting from
Blower to Vacuum, continued
4. Connect the tubes to the vacuum tube
adapter (see Figure 3-9). Align the tab
on the top tube with the notch on the
vacuum tube adapter. Press together
until you hear a "snap".
5. Position front of vacuum tube adapter
assembly over motor housing hook
(see Figure 3-10).
6. Pivot vacuum tube adapter assembly
to bottom of blower/vac housing.
Slightly press locking lever on vacu-
um tube adapter to allow adapter to
lock into place (see Figures 3-11 and
3-12).
Notch
Tab
Figure 3-9: Connecting vacuum tubes to vacuum tube
adapter
4
Figure 3-10: Attaching vacuum tube adapter to motor
housing hook
2
Figure 3-11: Pivoting vacuum tube adapter to
blower/vac housing
3
Figure 3-12: Pressing locking lever
5