Technical Datasheet - Miele professional PG 8083 Plano De Instalación

Technical Datasheet

Commercial Dishwasher
Legend:
Electrical
connection
It is recommended to make electrical connection via a plug and socket so that electrical safety checks can be carried
out easily. The socket must be accessible after machine installation.
With a fixed installation, this must be via a main switch to be provided on site, which must totally isolate the machine
from the mains with a contact gap of at least 3 mm.
The use of a grounded leakage circuit breaker (ELCB) is strongly recommended.
If necessary, an equipotential bond with good contact connection must be provided in accordance with all appropriate
national and local regulations.
Cold water or Max. Water hardness
Hot water Min. Flow pressure
Max. pressure
Throughput
Connection thread - on site (flat sealing)
Length of connection hose (supplied)
Max. Hot water
DVGW certified
Direct connection without fuse box permissible
Drain water Drain hose (Int. dia. × wall thickness × l)
Drain pump head height from floor level, max.
Drainage hose delivery, max.
On-site hose connector (Ext. dia. × l)
Machine data Height
Width
Depth
Installation should only be carried out by authorized installers and must comply with local and national building codes. Ensure
that appropriate furniture and materials are in the area surrounding the dishwasher otherwise damage from condensation may
occur. Observe installation instructions when installing this machine. Alteration rights reserved.
Version Date
A19564 12.12.2012
A41971 08.02.2016
A10001389 18.11.2016
Installationsplan PG 8083
Stand: 15.09.2017
Circled, bold-type abbreviations:
Connection required
Circled, bold-type abbreviations:
Connection required or optional
Voltage
Rated load
Fuse rating
Minimum cross-section
Length of electrical cord with plug
Supplied plug
Voltage
Rated load
Fuse rating
Minimum cross-section
Length of electrical cord with plug
Supplied plug
Voltage variation
+ TR
600 mm  570 mm
PG 8083
AC 120/208 V -
240/60 Hz
3.5-4.2 kW
2 x 30 A
10/4 AWG
5' 10 7/8"
NEMA 14-30P
AC 120/60
V/Hz
1.5 kW
15 A
14/3 AWG
5' 7"
NEMA 5-15P
37.5 gpg
4.35 psi
145 psi
1.58 gal/min
3/4" external
thread
11.5 NH
4' 11 1/16"
140 °F
7/8" x ¼" x
4' 11 1/16"
3' 3 3/8"
4.2 gal/min
7/8" x 1 3/16"
33 1/4"
23 9/16"
23 5/8"
Designation
US
AC 120/208 V -
240/60 Hz
3.5-4.2 kW
2 x 30 A
10/4 AWG
1.8 m
NEMA 14-30P
AC 120/60 V/Hz
1.5 kW
15 A
14/3 AWG
1.7 m
NEMA 5-15P
36 °dH
30 kPa
1,000 kPa
6.0 l/min
3/4" external
thread
11.5 NH
1500 mm
60 °C
22 x 6 x 1500
mm
1 m
16 l/min
22 x 30 mm
845 mm
598 mm
570 mm
30