Merrithew Cardio-Tramp El Manual Del Propietario página 6

MAINTENANCE & REPLACEMENT PARTS
Replacing Webbing
It is recommended that you have your Cardio-Tramp rebounder re-webbed by a professional upholsterer
or contact [email protected] for a quote.
1. Remove webbing from Cardio-Tramp
by detaching all four Velcro strips around
the metal frame.
4. Start by securing bottom edge of
replacement webbing. At the bottom of
the frame, there is a square rod and a
rounded bar. Wrap straps over rounded
bar only. Attach Velcro securely as outlined
above, striking entire length of Velcro strip
with mallet.
7. Wrap straps around remaining side of
frame. Press Velcro from middle outwards,
pulling down on each strap until Velcro
strips line up exactly. Strike entire length
of Velcro strip with rubber mallet.
6 Cardio-Tramp Owner's Manual
®
2. To ensure correct positioning of
replacement webbing, place webbing on a
flat, solid surface with the logo face-down.
Ensure straps on all four sides are open
with Velcro strips facing upward.
NOTE: Surface must be strong and stable
enough to support firm tapping from a
rubber mallet or similar tool.
5. Next, wrap straps around top of frame.
Press Velcro from middle outwards,
pulling down firmly on each strap until
Velcro strips line up exactly. Then strike
entire length of Velcro strip with mallet.
8. Finally, using a rubber mallet or similar
tool without sharp edges, strike entire
length of Velcro to ensure it is fully attached,
specifically at the ends.
Required Tool
Rubber Mallet
3. With rounded corners at top, place metal
frame of Cardio-Tramp on webbing straps.
Align frame with middle of each strap.
NOTE: When securing Velcro, press together
from the middle outwards. Ensure ends and
side of Velcro line up exactly. If necessary,
remove entire length of Velcro and reposition
until lined up exactly.
6. Then, wrap straps around one side of
frame. Press Velcro from middle outwards,
pulling down on each strap until Velcro
strips line up exactly. Then, strike entire
length of Velcro strip with mallet.
CAUTION: Jump test for solid Velcro
interlock before use.