Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Wet Clean Option Features
Wet Clean Capable
If the washer-extractor is equipped with the wet
clean capable option, the following features are
included: one-half wash speed for gentle
mechanical action during wash; eight supply
signals, providing normal laundering signals to
dispense detergents, bleaches, softeners, sours,
etc., and also chemicals unique to wet clean
processing. To prepare for the optional
Premium Wet Clean Module on future water
reuse systems, an additional water inlet
(capped) and recirculation drain capability are
included.
Premium Wet Clean Module
The washer-extractor may be equipped with the
Premium Wet Clean Module, a water
recirculation system (available from the
factory) that maximizes wet clean capabilities.
The water recirculation system consists of a
canister/filter/pump assembly which filters
water from the bath and returns the filtered
water to the bath, creating a gentle method of
cleaning through wash solution exchange.
For retrofit in the field, the washer-
Note:
extractor must have the factory-installed
wet-clean-capable option.
F232051
Installation
Delivery Inspection
Upon delivery, visually inspect crate, protective
cover, and unit for any visible shipping
damage. If the crate, protective cover, or unit
are damaged or signs of possible damage are
evident, have the carrier note the condition on
the shipping papers before the shipping receipt
is signed, or advise the carrier of the condition
as soon as it is discovered.
Remove the crate and protective cover as soon
after delivery as possible. If any damage is
discovered upon removal of the crate and/or
protective cover, advise the carrier and file a
written claim immediately.
Customer Service
If literature or replacement parts are required,
contact the source from whom the washer-
extractor was purchased or contact Raytheon
Commercial Laundry at (920) 748-3950 for the
name of the nearest authorized parts distributor.
For technical assistance, call any of the
following numbers:
(850) 718-1035
(850) 718-1026
Marianna, Florida
(920) 748-3121
Ripon, Wisconsin
A record of each washer-extractor is on file
with the manufacturer. The serial number decal
is located on the left side of the control module
at the rear of the machine. Figure 2 shows the
location of the serial number on the decal.
Always provide the machine's serial number
and model number when ordering parts or
when seeking technical assistance.
13
Capítulos
Tabla de contenido
