Limited Warranty - GreenWorks Pro STC404 Manual Del Operador

Ocultar thumbs Ver también para STC404:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Problem
The line does not ad-
vance.
The line keeps break-
ing.
The grass winds around
the trimmer head and
motor housing.
The line does not cut
well.
Vibration increases ob-
viously.
14

LIMITED WARRANTY

YEAR/ANS/AÑOS
TOOL WARRANTY
GARANTIE DE
L'OUTIL
HERRAMIENTA
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period of
four (4) years against defects in materials, parts or
workmanship. Greenworks, at its own discretion will
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
used for personal use that have not been hired or
rented for industrial/commercial use, and that have
been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or
maintained in accordance with the owner's manual;
or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants,
blade sharpening;
5. Normal deterioration of the exterior finish due to use
or exposure.
English
Possible Cause
Not enough line on spool.
Lines are worn too short.
Lines are tangled on spool.
The machine is used incorrectly.
Cut tall grass at ground level.
The cut-off blade becomes dull.
The line is worn down at one side
and not advanced in time.
Solution
Install more line.
Advance the cutting line.
1. Remove the lines from the spool.
2. Wind the lines.
1. Cut with the tip of the line, avoid stones, walls
and other hard objects.
2. Advance the cutting line regularly to keep full
cutting width.
1. Cut tall grass from the top down.
2. Remove no more than 8" in each pass to pre-
vent wrapping.
Sharpen the cut-off blade with a file or replace it.
Make sure that the line on both sides is normal.
Advance the line.
HELPLINE:
Warranty service is available by calling our toll-free
helpline, at 1-855-345-3934.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of
the purchaser. It is the purchaser's responsibility to pay
transportation charges for any part submitted for
replacement under this warranty unless such return is
requested in writing by Greenworks.
13
EN

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

St60l02

Tabla de contenido