Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. Line up the slots on the spool cap with the slots on
the trimmer head.
Spool
cover
3. Put the cutting line through the hole. Push the
cutting line until it exits the opposite hole.
Hole
4. Pull the cutting line through until there is an equal
quantity of cutting line on each side.
5. Turn the spool cap counterclockwise to wind the
cutting line into the trimmer head. Keep
approximately 5 in of cutting line above out of each
side of the trimmer head.
English
11
Remove the battery pack from the machine before
tranportation and storage.
11.1 MOVE THE MACHINE
When you move the machine, you must:
•
Stop the machine.
Bump
•
Remove the battery pack.
head
11.2 STORE THE MACHINE
•
Remove the battery pack from the machine.
•
Make sure that children cannot come near the
machine.
•
Keep the machine away from corrosive agents such
as garden chemicals and de-icing salts.
•
Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine
for any damage.
12
Type
Motor
No load speed
Cutting line diameter
Cutting path diameter
Feed Type
Weight (without battery
pack)
The recommended ambient temperature range:
Item
String trimmer storage
temperature range
String trimmer operation
temperature range
Battery charging tempera-
ture range
Charger operation temper-
ature range
11
TRANSPORTATION AND
STORAGE
WARNING
TECHNICAL DATA
Cordless, battery powered
60V Brushless
6000 / 5000 (±10%) RPM
0.095" (2.4 mm)
14 in. /16 in. (35.6 cm /
40.6 cm)
Bump Feed
7.9 lbs (3.6 kg)
Temperature
-4°F (-20°C) - 158°F
(70°C)
6.8°F (-14°C) - 104°F
(40°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 113°F (45°C)
EN
Capítulos
Tabla de contenido
Solución de problemas
