Grind-In Procedure - CLIPIC RADAR 125CC Manual Del Usuario

Grind-in procedure

GRIND-IN PROCEDURE
GRIND-IN PROCEDURE
1. In terms of new motorbike, during the 1,000km period you drive, the engine not only
couldn't work extremely, but its rotating speed on any gears never exceed 80 of its maxi-
mum. Throttle is never allowed to fully open. To change gear properly is good for engine.
As to new motorbike, during its grind-in period, if user could be careful to drive, the usage
time would be prolonged.
2. During grind-in period, user should change engine oil (it should be 1.4L) after driving
500km.
3. After grind-in period, driving at high speed can be allowed. However, user should pay at-
tention to any egregious hot, or abnormal sounds of the engine.
81