Running-In - CLIPIC STREPPER ST50 Manual Del Usuario

Running-in

The foreward explains how important the proper- running-in is to achieve maximum life and
performance from your new CLIPIC motorcycle.
The following guidelines explain proper running-in procedures.
Maximum speed
This table shows the maximum speed in runningin period.
Initial 160km
Up to 800km
Up to 1600km
VARY THE ENGINE SPEED
The engine speed should be varied and not held at a constant speed. This allow all the parts
in the engine to be loaded and unloaded. The parts will cool down when they are unloaded.
This is conductible for matching between the engine parts.
During running-in period, it is necessary to apply a reasonable stress on all the engine parts
to ensure the best matching between them. The stress or load applied to engine parts should
be adequate, not excessive.
RUNNING-IN
Less than 30km/h
Less than 33km/h
Less than 40km/h
93