Driving-Note - CLIPIC RADAR 125CC Manual Del Usuario

Driving note
DRIVING NOTE
GRIND-IN PROCEDURE
1. Warmed up the engine firstly.
2. When engine rotates at idle speed, pull clutch lever, mean-
time step on accelerator pedal, and gear is adjusted at low
speed (first speed).
3. Loosen up clutch lever slowly, and accelerate its speed.
The two items should be coordinated well ensuring its nor-
mal starting.
4. When motorcycle has come up to the condition that it
could be driven smoothly, engine speed should be lowered,
holding up the derailleur pedal, and adjust gear to the second
speed. So do other speeds.
5. To decrease the speed.operate the throttle coordinate
with arrester well so that decelerating effect of balance could
be achieved.
6. Front and rear arrester (brake) should be worked simul-
taneously. However, wheels couldn't be braked too tightly by
arrester, otherwise the brake effect would be weakened and
increase the difficulty of driving.
82