Components - CLIPIC RADAR 125CC Manual Del Usuario

Traffi c safety of motorbike
2. Tire pressure is adjusted well.
3. All the luggage and accessories must be tied tightly, moreover, they are to be inspected
from time to time to ensure they are not loosen.
4. Do not hang too big or too heavy things around the handles. Hanging any objects on the
front fork frame and protection board is forbidden. Otherwise, driving becomes difficult
and unstable.

COMPONENTS

All the original components are specially designed and tested. When any non-original parts
are adopted, the user should be completely responsible for possible effects. In terms of its
regulation, user can refer to the above chapter 'Load' and the following instructions.
1. Components to be inspected carefully before adopted, to avoid hampering view, lowering
distance between motor and ground, abating angle of side turning, affecting free movements
of hanger and direction lever, controlling operations, etc.
2. Un-proper installation of the streamline cover on the fork frame would interfere in air
flow and affect the stability of vehicle. In addition, do not install the cover if it hampers the
air flowing direction for engine cooling.
3. Do not install any extra components on your motorbike when they keep your feet and
hands far away from control handles. Otherwise you would have no idea to deal with them
in urgencies.
67