Protecting The Environment; Ec Declaration Of Conformity - Black and Decker LZR3 Manual Del Usuario

ENGLISH
Refit the cover and let it click into place.
x
Wall mounting (fig. B)
The unit can be mounted to walls using one of the wall
mounts (6 or 7).
Warning! Keep the wall mounts in a safe place when not in
use.
Wall plug
The wall plug (6) has expandable legs to ensure a secure grip
in most wall constructions.
Drill a hole at a suitable location using a drill bit of 4-8 mm
x
diameter.
Insert the wall mount with the legs (8) closed into the
x
pre-drilled hole.
While keeping the plug in place, rotate the collar (9)
x
clockwise until the legs of the wall mount engage in the
hole.
Install the unit by clinging the magnet (5) to the steel knob
x
(10).
Wall pin
If the unit is mounted to drywall or other soft materials,
the wall pin (7) must be used:
Fold out the spade pin (11).
x
Hold the wall mount in front of a suitable location and
x
press the pin straight into the wall.
Install the unit as described above.
x
Use (fig. C)
Place the tool flat against the wall as shown.
x
Push the on/off switch (1) down to switch the tool on.
x
Move the tool as necessary to position the laser line.
x
If necessary, hang the unit on the wall using the
x
appropriate wall mount.

Protecting the environment

Tools
Should you find one day that your tool needs
replacement, or if it is of no further use to you, think
of the protection of the environment. Black & Decker
repair agents will accept old Black & Decker tools
and ensure that they are disposed of in an
environmentally safe way.
Battery
If you want to dispose of the tool yourself, the
battery must be removed as described above and
disposed of in accordance with local regulations.
Place the battery in a suitable packaging to ensure that the
terminals cannot be short-circuited.
4
Take the batteries to a local recycling station.
Technical data
Voltage
Battery size
Laser class
Operating temperature
Weight (without battery)

EC declaration of conformity

Black & Decker declares that these products conform to:
EN 61010-1, EN 60825-1, EN 61000-6-3, EN 61000-6-1
Peter Holmes, Director of Engineering
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement is
in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member
States of the European Union and the European Free Trade
Area.
If a Black & Decker product becomes defective due to faulty
materials, workmanship or lack of conformity, within 24 months
from the date of purchase, Black & Decker guarantees to
replace defective parts, repair products subjected to fair wear
and tear or replace such products to ensure minimum
inconvenience to the customer unless:
The product has been used for trade, professional or hire
x
purposes;
The product has been subjected to misuse or neglect;
x
The product has sustained damage through foreign
x
objects, substances or accidents;
Repairs have been attempted by persons other than
x
authorised repair agents or Black & Decker service staff.
To claim on the guarantee, you will need to submit proof of
purchase to the seller or an authorised repair agent. You can
check the location of your nearest authorised repair agent by
contacting your local Black & Decker office at the address
indicated in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
LZR3
V 9
6LR61
2M
°C 0 - 40
kg 0.08
BDCI, 4/F, 2 Dai Wang Street
Tai Po Industrial Estate
Tai Po NT, Hong Kong