AVM FRITZ!Powerline 540E Instalación Y Operación página 7

Operating FRITZ!Powerline 540E Manually
Operation
on
flashing
flashing rapidly
off
press briefly
press and hold
for longer than
six seconds
Reset
on
flashing
off
press briefly
12
Condition
The wireless LAN function is enabled
WPS quick connection in progress
Searching for the base station in the Wireless
Bridge operating mode
WLAN function is switched off
Starting a WPS quick connection
Adopt the wireless settings of the FRITZ!Box
for factory settings, press
and hold at the same
time for longer than 10 seconds
is connected with the powerline network and
ready for data exchange
resetting or configuring security settings
is off, or did not detect any compatible powerline
devices, or did not detect any devices that use
the same network key
Integrating FRITZ!Powerline 540E safely into an
existing powerline network
The FRITZ!Powerline 510E Status Display
LED
Power on
flashing
flashing slowly
off
LAN on
off
Powerline on
flashing
off
press and hold for 10 to 15
seconds
Security
Condition
has electrical power
restarting
is on standby
has no electrical power
the LAN port is in use
no LAN cable is connected or the device on
the LAN cable is switched off
is connected with the powerline network
and ready for data exchange
configuring security settings
did not detect any compatible powerline
devices or did not detect any devices that
use the same network key
Factory Settings
13