Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
The MX-DS1 is a hand-held desoldering tool which utilizes shop air to create a powerful
Venturi vacuum to clean through-holes quickly and efficiently. Paper solder collection
liners within the hand-piece barrel are easy to maintain and are an improvement upon
traditional glass tubes. Shop air is required for operation.
ACCESSORIES & SPARES
MX-DCF1
MX-DCF1L
MX-MCF1F
MX-DAR1
AC-TC-P
AC-CB1-P
AC-CB2-P
MX-DVC-1
MX-DSL1
MX-DSL2
MX-DSB
MX-DLA
MX-DMK1
CHOOSING THE CORRECT
GEOMETRY
Select a tip with an inside diameter
larger than the lead diameter. Select
a tip with an outside diameter that is
approximately the same size as the
pad.
A standard STDC cartridge can
desolder a maximum lead length of
0.0170." For fast, safe removal of devices that are difficult to reach on densely populated
boards, or to remove long pin connectors, try the STDC long reach cartridges. They are
identical to standard STDC tip cartridges, but with a 0.46" long extension at the tip.
CHOOSING THE CORRECT TEMPERATURE (SERIES)
Inside
Outside
Dia.
Dia.
(A)
(B)
0.025"
0.055"
0.030"
0.066"
0.040"
0.070"
0.050"
0.080"
0.060"
0.090"
0.095"
0.125"
DS1 Filter Pack; 15 Chamber Liners, 6 Fume Filters
DS1 Chamber Liners (pack of 40)
DS1 Fume Filters (pack of 20)
Air Regulator and Filter with Fittings
Desolder tip Cleaner (Pack of 12)
Desolder Chamber Cleaning Brush (Pack of 25)
Desolder Tube Cleaning Brush (Pack of 6)
Venturi Cartridge for Desolder Gun
DS1 Chamber Seal
DS1 Cartridge Seal
Desolder Gun Swivel Bushing
Desolder Gun Latch Adjustment (Pack of 10)
DS1 Maintenance Kit
Correct
Too Small
Start with a 700 Series cartridge, switching to
a 800 Series only where absolutely
necessary; for example, when working with
ground planes or multi-layer boards. For long
reach tips, start with a 700 Series cartridge.
For extremely heavy loads tied to ground
planes, or very thick multi-layer boards, 800
Series cartridges may be necessary.
Part Number
700
800
Series
Series
STDC-102
STDC-802
STDC-103
STDC-803
STDC-104
STDC-804
STDC-105
STDC-805
STDC-106
STDC-806
STDC-107
STDC-807
Too Large
long reach
long reach
700 series
800 series
N/A
N/A
STDC-703L
STDC-803L
STDC-704L
STDC-804L
STDC-705L
STDC-805L
N/A
N/A
N/A
N/A
- 2 -
Tabla de contenido
