Smart Card - Nuova Simonelli MICROBAR Instrucciones De Manejo

EN
The ▲▼ keys scroll up and down the various totals
of cycles associated to each key used.
The RESET key is used to return to the preceding
menu.
In the first position and keeping the ▲ key pressed,
the absolute total of the doses produced by the
machine using the right grinder is visualised.
E.G.
Pressing the 1Espresso key and the 2Espresso key
once, the following can be read:
o t a l c y c l e s
1 E s p r e s s o 1
o t a l c y c l e s
2 E s p r e s s o 1
b s o l u t e t o t a l
o f d o s e s 3
To zero the counting of the various cycles, simul-
taneously press the ▲▼ keys. The message
"Counters Reset" is visualised on the display.
21. TOTAL COUNT 2
(only in the version with a double grinder)
Pressing the ENTER key, the sub-menu can
be entered.
The number of cycles effectuated for each
drink key is visualised, following the use of the
left grinder.
The ▲▼ keys scroll up and down the various totals
of cycles associated to each key used.
The RESET key is used to return to the preceding
menu.
In the first position and keeping the ▲ key pressed,
the absolute total of the doses produced by the
machine using the left grinder is visualised.
To zero the counting of the various cycles, simul-
taneously press the ▲▼keys. The message
"Counters Reset" is visualised on the display.
22. TOTAL COUNT
(All versions)
Pressing the ENTER key, the sub-menu can be
entered. The following are visualised:
• The number of cycles effectuated for each
drink key, following the use of the left and
right grinders.
• Decaffeinated total
• Washing cycle total
• Steam total
• Hot water total
• Total of litres of water
The ▲▼ keys scroll up and down the various totals.
The RESET key is used to return to the preceding
menu.
In the first position and keeping the ▲ key pressed,
the absolute total of the doses produced by the
machine.
To zero the counting of the various cycles and
the decaffeinated, steam and hot water totals,
simultaneously press the ▲▼keys. The message
"Counters Reset" is visualised on the display.
23. PASSWORD
Press the ENTER key to access the submenu.
This programmes a new password to access
the functions that can be programmed in the
TECHNICIAN MODE.
Enter a combination of 5 keys (from the 8 keys
available on the keyboard) and set the new
required password.
Press the RESET key to quit the submenu and return
to the main menu without confirming the setting.
Press the ENTER key to confirm the setting.

24. SMART CARD

Press the ENTER key to access the submenu.
This sets the SMART CARD reader to enabled.
The function is enabled by setting the parame-
ter to YES.
Press the  keys to enable (YES) / deactivate
(NO) the SMART CARD reader.
63