Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation Instructions – LSR8BX* Commercial LED Rough-In
INSTALLATION
LED and Trim assembly to be installed only after
N
otee:
cylinder is installed.
Surface Mount Cylinder Bracket
1.
Remove locking screw.
2.
Rotate the mounting plate in anticlockwise direction to
separate from assembly and to remove from cylinder
(Figure 1).
3.
Attach mounting plate to Junction Box.
4.
Attach tether under one Junction Box mounting screw
(Figure 3).
5.
Wire Unit per appropriate Wiring Diagram (refer to
electrical section). Push wiring into Junction Box.
6.
Insert tabs from mounting plate in to cylinder top.
Rotate cylinder clockwise to engage hooks.
7 .
Ensure holes are aligned, install Locking screw.
Figure 1.
LED Engine
Lens
Lower Trim
Figure 2.
Lower Trim Assembly
Figure 3.
2
EATON
IL520016ML
Torsion
Springs
Mounting
Plate
Tether
Installation instructions
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Tabla de contenido
