Technical Data - Titan Compact 170 Manual Del Usuario

Compact 170
Pos. Description
1
Spray gun LX-80, G-thread (without nozzle)
2
Filter (white, 1 pack)*
Filter (red, 1 pack)*
3 Suction hose and Return line
4
Paint nozzle 310 (purple)*
Dispersion nozzle 417 (red)*
5 High-pressure hose, 7.5m, red
* Wearing part: not covered by warranty
Description
Spray nozzle 410
Water-soluble and solvent based enamels and paints, oils and release agents
Spray nozzle 515
Enamel paints, undercoats, primers, fillers, indoor latex paints and indoor emulsions
Spray nozzle 517
Enamel paints, undercoats, primers, fillers, indoor latex paints and indoor emulsions, anti-corrosive paints
Spray nozzle 519
Enamel paints, undercoats, primers, fillers, indoor latex paints and indoor emulsions, anti-corrosive paints)
Filter, red (1 pack); 180 mesh extra fine; for spray nozzle 410
Filter, yellow (1 pack); 100 mesh fine; for spray nozzle 515
Filter, white (1 pack); 50 mesh medium; for spray nozzle 517, 519
Spray hose, 3/16", 7.5 m
Spray hose, 3/16"", 15 m
Pump type
Power source
Power consumption
Fusing
Protection class
Max. spray pressure
Max. delivery rate
Sound pressure level *
Sound pressure output *
Oscillation level **
Max. temperature of coating
substance
Max. nozzle size
Hose length
Product dimensions
Weight
* Measured in accordance with EN 50144-2-7:2000
** Measured in accordance with EN 60745-1
Information about the oscillation level
The specified oscillation level has been measured according to a standard test procedure and can be used to compare against electric tools.
The oscillation level is also for determining an initial assessment of the vibrational strain.
attention! The vibration emission value can differ from the specified value when the electric tool is actually in use, depending on
how the electric tool is being used. It is necessary to specify safety measures to protect the operating personnel. These measures are
based on an estimated shutdown during the actual conditions of use (all parts of the operating cycle are taken into consideration
here, for example periods when the electric tool is switched off, and, when it is switched on but running without any load).
Spare Parts List (Fig. 30)
accessories (not included in the delivery)

Technical Data

Piston pump
230 V 50 Hz / 240 V 50 Hz
~ ~
750 W / 790 W
Only connect to sockets protected with an FI fuse (16 A)
I
20 MPa (200 bar)
1,0 l/min
72 dB (A) Uncertainty K= 4 db
85 dB (A) Uncertainty K= 4 db
< 2,5 m/s Uncertainty K= 1.5 m/s
2
40°C
0,017"
7,5 m
approx. 34 x 34 x 47 cm
approx. 12.4 kg
2
GB
Order no.
0286 249
500-200-06
500-200-15
0523687
671-310
661-417
0291 007
Order no.
671-410
661-515
661-517
661-519
500-200-15
500-200-10
500-200-06
0291 007
0291 008
25