Field Of Application - Titan Compact 170 Manual Del Usuario

GB
1 Pressure regulator
3 Inlet valve pusher
5 Nozzle holder
7 Paint nozzle 310 (purple) and dispersion nozzle 417 (red)
9 ON / OFF Switch (0 = OFF, I = ON)
11 High-pressure hose
13 Return line
15 Suction hose
17 Oil
* second filter pre-installed in gun
Coating Materials Suitable for Use
Dispersion and latex paints for interior use.
Water-based and solvent-containing lacquers and glazes. Paints, oils, release agents, synthetic enamels, PVC lacquers, undercoats,
base coats, fillers and anti-rust paints.
Coating Materials not Suitable for Use
Materials that contain highly abrasive components, facade paint, caustic solutions and acidic coating substances.
Materials with a flash point below 21°C.
In order to ensure compatibility of the coating substance with the materials used to manufacture the device, please
i
contact your Titan dealer in cases of doubt.

Field of application

Coating interior walls and outside objects (e.g. garden fences, garage doors, etc.).
Required tools and auxiliary material
•
Adjustable wrench (2 pcs.)
•
Flat-blade screwdriver
•
Empty container
•
A large piece of cardboard
•
Covering material
Preparation of the workplace
Sockets and plugs must be masked. Risk of an electric shock as a consequence of sprayed material entering the
socket!
Mask all the areas and objects that are not to be spray painted, or remove them from the work area.
no liability is assumed for damage due to overspray.
Silicate paint corrodes glass and ceramic surfaces upon contact! all such surfaces must therefore be completely
Danger
covered.
Pay attention to the quality of the adhesive tape used. Do not use excessively strong adhesive tape on wallpaper and
i
painted surfaces, in order to avoid damaging these surfaces when removing the tape. Remove adhesive tape slowly
and evenly; do not use jerky movements. Do not leave adhesive tape on surfaces any longer than necessary, in order to
minimise the possibility of residues when removing. Also observe the adhesive tape manufacturer's instructions.
Preparation of the Coating Material
Using Compact 170 interior wall paints, varnishes and glazes can be applied by spraying without diluting them, or by diluting
them slightly. Detailed information is available in the technical data sheet of the manufacturer ( Internet download).
1. Stir the material thoroughly and dilute it in the container as per the recommended dilution (an agitator is recommended for
stirring).
20
Beschreibung (abb. 1)
2 Hose connection
4 Carry handle
6 Spray Gun
8 Filter red (1 unit) for spray nozzle 310
Filter white (2 units) for spray nozzle 417*
10 Selector switch
12 Automatic lubricator (button to lubricate pump)
14 Inlet filter
16 Operating instructions
Compact 170