Adjusting The Play Of The Handwheels; Ec Declaration Of Conformity - Proxxon PD 250/E Manual De Instrucciones

5. Then check if the support can still be moved easily and if it
runs completely without play.
Adjusting the play of the handwheels (Fig. 29):
Just as for the guides, handwheel wear during operation can-
not be avoided which ensures that the backlash increases
slowly but consistently. To minimise this again, please proceed
as follows:
1. Hold on to the handwheel 1 and release the cap nut 2.
2. Turn the handwheel slightly to the right.
3. Retighten the cap nut while still holding the handwheel.
Please consider here as well:
The complete elimination of the backlash and a too "tight"
adjustment for the handwheels is unreasonable: If the hand-
wheels are set too closely, this causes higher operating forces
as well as increased wear here as well!
Disposal:
Please do not dispose of the device in domestic waste! The
device contains valuable substances that can be recycled. If
you have any questions about this, please contact your local
waste management enterprise or other corresponding munici-
pal facilities.

EC Declaration of Conformity

Name and address:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation:
Article No.:
In sole responsibility, we declare that this product conforms to
the following directives and normative documents:
EU EMC Directive 2004/108/EC
DIN EN 55014-1 / 05.2012
DIN EN 55014-2 / 06.2009
DIN EN 61000-3-2 / 03.2010
DIN EN 61000-3-3 / 03.2014
EU Machinery Directive 2006/42/EC
DIN EN 61029-1 / 01.2010
Date: 29.11.2014
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the
signatory.
PD 250/E
24002
- 25 -